Definition of Damping factor
In an audio power amplifier, the damping factor is defined as the ratio of the rated impedance of the loudspeaker (usually assumed to be 8 Ω) to the source impedance of the power amplifier. It was originally proposed in 1941. Only the magnitude of the loudspeaker impedance is used, and the power amplifier output impedance is assumed to be totally resistive.
In typical solid state and tube amplifiers, the damping factor varies as a function of frequency. In solid-state amplifiers, the damping factor usually has a maximum value at low frequencies, and it reduces progressively at higher frequencies. The figure to the right shows the damping factor of two amplifiers. One is a solid-state amplifier (Luxman L-509u) and the other is a tube amplifier (Rogue Atlas). These results are fairly typical of these two types of amplifiers, and they serve to illustrate the fact that tube amplifiers usually have much lower damping factors than modern solid-state amplifiers, which is an undesirable characteristic.
Terms mentioned above
Related terms
Modulation transformer
A modulation transformer is an audio-frequency transformer that forms a major part of…
Sansui AU-11000
The Sansui AU-11000 is a home audio integrated amplifier built by Japanese audio…
Fender Tremolux
The Fender Tremolux was a guitar amplifier made by Fender. It was introduced in the…
Power bandwidth
The power bandwidth of an amplifier is sometimes taken as the frequency range (or…
Signal-to-noise ratio
Signal-to-noise ratio (SNR or S/N) is a measure used in science and engineering that…
Total system power
Total system power is a term often used in audio electronics to rate the power of an…
Total harmonic distortion
The total harmonic distortion (THD or THDi) is a measurement of the harmonic distortion…
ITU-R 468 noise weighting
ITU-R 468 (originally defined in CCIR recommendation 468-4, therefore formerly also…
McIntosh MC-2300
The McIntosh MC-2300 is a solid-state power amplifier which was built by the American…
Frequently asked questions
What is Damping factor?
In an audio power amplifier, the damping factor is defined as the ratio of the rated impedance of the loudspeaker (usually assumed to be 8 Ω) to the source impedance of the power amplifier. It was originally proposed in 1941.
Sources & credits
- Wikipedia: Damping factor – CC BY-SA 4.0
- Image by Wikiwald – CC BY-SA 4.0