Definition of Sensitivity (electronics)
The sensitivity of an electronic device, such as a communications system receiver, or detection device, such as a PIN diode, is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria. In general, it is the signal level required for a particular quality of received information.
In signal processing, sensitivity also relates to bandwidth and noise floor as is explained in more detail below.
In the field of electronics different definitions are used for sensitivity. The IEEE dictionary states: "Definitions of sensitivity fall into two contrasting categories." It also provides multiple definitions relevant to sensors among which 1: "(measuring devices) The ratio of the magnitude of its response to the magnitude of the quantity measured.” and 2: "(radio receiver or similar device) Taken as the minimum input signal required to produce a specified output signal having a specified signal-to-noise ratio.”. The first of these definitions is similar to the definition of responsivity and as a consequence sensitivity is sometimes considered to be improperly used as a synonym for responsivity, and it is argued that the second definition, which is closely related to the detection limit, is a better indicator of the performance of a measuring system.
Terms mentioned above
Related terms
Microphonics
Microphonics, microphony, or microphonism describes the phenomenon wherein certain…
Microphone preamplifier
The term microphone preamplifier can either refer to the electronic circuitry within a…
Phantom power
Phantom power, in the context of professional audio equipment, is direct current (DC)…
Balanced audio
Balanced audio is a method of interconnecting audio equipment using balanced interfaces…
Directivity
In electromagnetics, directivity is a parameter of an antenna or optical system which…
Laser microphone
A laser microphone is a surveillance device that uses a laser beam to detect sound…
Schaffer–Vega diversity system
The Schaffer–Vega diversity system (SVDS) was a wireless guitar system developed in…
Sending loudness rating
The sending loudness rating (SLR) is a measure of the loudness of the transmit audio…
Bias tee
A bias tee is a three-port network used for setting the DC bias point of some electronic…
Frequently asked questions
What is Sensitivity (electronics)?
The sensitivity of an electronic device, such as a communications system receiver, or detection device, such as a PIN diode, is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or…