Definition of Slew-induced distortion
Slew-induced distortion (SID or slew-rate induced distortion) is caused when an amplifier or transducer is required to change output (or displacement), i.e. slew rate, faster than it is able to do so without error. At such times any other signals may suffer considerable gain distortion, leading to intermodulation distortion. Transient intermodulation distortion may involve some degree of SID and/or distortion due to peak compression.
These are effects that tend to occur only during parts of a waveform fed through audio amplifiers, that may give rise to audible degradation of the sound quality in music, even when fixed-frequency harmonic distortion tests show low amounts of distortion for a simple sinewave test signal.
TIM (Transient Intermodulation Distortion) was first discovered by Matti Otala in the 1960s due to accidentally wiring an amplifier incorrectly.
Terms mentioned above
Related terms
Audio feedback
Audio feedback (also known as acoustic feedback, howlround in the UK, or simply as…
Effects loop
An effects loop is a series of audio effects units, connected between two points of a…
Distortion (music)
Distortion and overdrive are forms of audio signal processing used to alter the sound of…
DI unit
A DI unit (direct input or direct inject) is an electronic device typically used in…
Re-amp
Re-amping is a process often used in multitrack recording in which a recorded signal is…
Leslie speaker
The Leslie speaker is a combined amplifier and loudspeaker that modifies the sound of an…
Critical distance
Critical distance is, in acoustics, the distance at which the sound pressure level of…
Boss DS-1
The Boss DS-1 Distortion is a distortion pedal manufactured by Boss since 1978. …
Chorus (audio effect)
Chorus is an audio effect that occurs when individual sounds with approximately the same…
Frequently asked questions
What is Slew-induced distortion?
Slew-induced distortion (SID or slew-rate induced distortion) is caused when an amplifier or transducer is required to change output (or displacement), i.e. slew rate, faster than it is able to do so without error.